Dimensions • 19” (483 mm) W x 9.6” (244 mm) L x 1.75” (45 mm) H (one rack unit) Weight • 4 lbs. (1.8 kg) dry, 5.5 lbs. (2.5 kg) shipping Connectors • RS-232: DB9F • EF Bus In/Out: RJ45 • Control /Status: DB25F • Audio: Mini (3.5mm) quick connect terminal blocks Power • External supply (provided) • Input voltage of 110-240 VAC; 47-63 Hz; power consumption 30 W Inputs • Phantom power: 48 V DC, software selectable • Analog input Gain: 0 to 30 dB Mic/line inputs in 1 dB steps, software adjustable • Mic/Line switch gain: 33 dB • Maximum input amplitude: +19 dBu, 1% THD + N • Nominal level: 0 dBu (0.775V rms) • Equivalent input noise: • Input Impedance: 10 kOhms • Input EMI Filter: Pi filter on all audio inputs Outputs • Output Gain: -100 to 20 dBu in 1 dB steps, software adjustable • Maximum output amplitude: +23 dBu, 1% THD + N • Nominal output level: 0 dBu (0.775 V rms) • Output impedance: 33 Ohm, each leg to ground • Output EMI Filter: Pi filter on all audio outputs System* • Frequency response: 20-20,000 Hz, + 0.2 /- 0.3 dB • Idle channel noise: Hz, 0 dB gain • Dynamic range: >100 dB FS "A" weighted, 20 - 20,000 Hz, 0 dB gain • Linearity: 0 dB FS to -110 dB FS +/- 1 dB • THD+N: < -90 dB FS • Common Mode Rejection Ratio: no weighting • Cross talk: • Latency: Mic/Line inputs to outputs: 13 ms, processing enabled • Acoustic Echo Cancellation Span: 270 ms • Total Cancellation: >65 dB • Convergence Rate: 40 dB/second • Noise cancellation: 0-15 dB, software selectable • Operating Temperature: 0° - 40° C • Control Inputs: Contact closure • Status Outputs: 5 V, 20 mA each *Unless noted, all values are valid for all channels at line level